Building services engineering
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (August 2010) |
Building services engineering, technical building services, architectural engineering, or building engineering is the engineering of the internal environment and environmental impact of a building. It essentially brings buildings and structures to life.
Building services engineers are responsible for the design, installation, operation and monitoring of the mechanical, electrical and public health systems required for the safe, comfortable and environmentally friendly operation of modern buildings. The term "building services engineering" is widely used in the United Kingdom, Canada and Australia, but in the United States of America, the field is also known as architectural engineering or building engineering, though these terms can also have other meanings, even in the United States.
Contents |
[edit] Introduction
Building services engineering comprises mechanical engineering, electrical engineering and plumbing or public health (MEP) engineering, all of which are further sub-divided into the following:
- Communication lines, telephones and IT networks (ICT)
- Energy supply - gas, electricity and renewable sources
- Escalators and lifts
- Fire detection and protection
- Heating, ventilation and air conditioning (HVAC)
- Lightning protection
- Low voltage (LV) systems, distribution boards and switchgear
- Natural lighting and artificial lighting, and building facades
- Security and alarm systems
- Ventilation and refrigeration
- Water, drainage and plumbing
Building services engineers work closely with other construction professionals; architects, structural engineers and quantity surveyors. They influence the architecture of a building and play a significant role on the sustainability and energy demand of a building. Within building services engineering, new roles are emerging, for example in the areas of renewable energy, sustainability, low carbon technologies and energy management. With buildings accounting for around 50% of all carbon emissions, building services engineers play a significant role in combating climate change. As such, a typical building services engineer has a wide-ranging career path:
- Design: designing layouts and requirements for building services for residential or commercial developments.
- Construction: supervising the construction of the building services, commissioning systems and ongoing maintenance and operation of services.
- Environmental: developing new energy saving methods for construction, designing new and improved energy conservation systems for buildings.
- Heating, ventilation and air conditioning (HVAC): specialising in the design, development, construction and operation of HVAC systems.
- Electrical technology: specialising in the design and development of electrical systems required for safe and energy sustaining operation of buildings.
In 1976 Chartered Institution of Building Services Engineers (CIBSE) was founded and received a Royal Charter in the United Kingdom, and formally recognising building services engineering as a profession. Its objectives of the Institution are to: support the Science, Art and Practice of building services engineering, by providing our members and the public with first class information and education services and promoting the spirit of fellowship which guides our work.
In recent years there has been increasing emphasis on sustainable and green design by the UK government, including in engineered building systems. Building services engineers increasingly seek BREEAM (BRE Environmental Assessment Method), CIBSE Low Carbon Consultants (LCC) and Energy Assessors (LCEA) status in addition to their Professional Engineering registration.
[edit] Building services engineering software
Many building services firms use computer-aided engineering (CAE) software programs, created either in-house or by external parties, to assist in their system design and analysis. This method has many benefits, including easier and more exhaustive visualization of proposed solutions, the ability to create virtual models for analysis and calculations, and the ease of use in spatial planning.
[edit] Education
Building services engineers typically possess an academic degree in either building services engineering, mechanical engineering or electrical engineering. The length of study for such a degree is usually three years for a Bachelor of Engineering (BEng) or Bachelor of Science (BSc) and four years for a Master of Engineering (MEng). Some of the degrees accredited by the Chartered Institution of Building Services Engineers include:
[edit] Bachelors
- BSc (Hons) Integrated Technology (Building Services) (Doncaster College)
- BSc in Building Services Engineering (Glasgow Caledonian University)
- BSc (Hons) Building Services Engineering (Leeds Metropolitan University)
- BSc (Hons) Building Services Engineering (London South Bank University)
- BSc (Hons) Building Services Engineering (University of the West of England)
- BSc (Hons) Architectural Engineering (Heriot-Watt University)
- BEng (Hons) Building Services Engineering (Coventry University)
- BEng (Hons) Building Services Engineering (The Hong Kong Polytechnic University)
- BEng (Hons) Architectural Environment Engineering (University of Nottingham)
- BEng (Hons) Building Services Engineering ([Liverpool John Moore's University])
- BEng (Hons) Building Services Engineering (Dublin Institute of Technology)
- BEng in Facilities and Service Planning( Buildings) (School of Planning and Architecture, Jawharlal Nehru Architecture & FineArts University, Hyderabad, India )
[edit] Masters
- MSc Building Services (Technical University Eindhoven)
- M.Arch. Design Science (Building Services) (The University of Sydney)
- MEng Architectural Engineering Design (University of Sheffield)
- MSc Building Services (UNIVERSITY OF CENTRAL LANCASHIRE)
- MEng Architectural and Environmental Design (University of Nottingham)
- MEng Architectural Engineering (Heriot-Watt University)
- Architectural Engineering (University of Strathclyde)
- MEng (Hons) Mechanical Engineering (with Building Services Engineering) (The University of Manchester)
- MEng Architectural Science and Engineering Services (The University of Manchester)
- MSc Building Services Engineering (Loughborough University)
- MEng Building Services Engineering (Hong Kong Polytechnic University)
- MEng Building Services and Energy Engineering (University of Ulster)
- MEng Building Services Engineering (Northumbria University)
- MSc Buildings and Environment (Czech Technical University in Prague)
- MSc Building Service Engineering (International Islamic University Malaysia in Malaysia)
- MSC Building Services engineering ([Glasgow Caledonian University. uk])
Courses accredited by other Engineering Institution in the UK such as the Institution of Engineering and Technology (IET) and the Institution of Mechanical Engineers (IMechE) are also accepted and satisfy the education requirement to become a building services engineer. After completing an accredited degree program the engineer must also satisfy a range of other requirements (including work experience and possibly exam and report-writing requirements) before acquiring the professional qualification. Once all the requirements are satisfied and depending on the academic route undertaken by the engineer, he or she is designated the title of either "Chartered Engineer" (CEng), "Incorporated Engineer" (IEng) or "Engineering Technician" (EngTech). There are international engineering agreements between relevant professional bodies which are designed to allow engineers to practice across international borders. Note that the term "Chartered Engineer" is mainly used in the UK and in most Commonwealth countries. In the European Union, "European Engineer" is used instead.
[edit] Institutions
[edit] United States
Programs in the United States, with those accredited by ABET shown with their year of initial accreditation, are:[1]
- California Polytechnic State University, San Luis Obispo, CA (ABET 1975, AEI)
- Drexel University, Philadelphia, PA (ABET 1991, AEI)
- Illinois Institute of Technology, Chicago, IL (ABET 2003, AEI)
- Kansas State University, Manhattan, KS (ABET 1936-61 and 1980, AEI)
- Milwaukee School of Engineering, Milwaukee, WI (ABET 1988, AEI)
- Missouri University of Science and Technology, Rolla, MO (ABET 2006, AEI)
- North Carolina A&T State University, Greensboro, NC (ABET 1969, AEI)
- Oklahoma State University, Stillwater, OK (ABET 1986, AEI)
- Penn State University, State College, PA (ABET 1936, AEI)
- Tennessee State University, Nashville, TN (ABET 1977, AEI)
- Texas A&M University, Kingsville, TX
- University of Colorado at Boulder, Boulder, CO (ABET 1936, AEI)
- University of Kansas, Lawrence, KS (ABET 1936, AEI)
- University of Miami, Miami, FL (ABET 1962, AEI)
- University of Nebraska at Omaha, Omaha, NE (ABET 2004, AEI)
- University of Oklahoma, Norman, OK (ABET 1960)
- University of Texas at Austin, Austin, TX (ABET 1938, AEI)
- University of Wyoming, Laramie, WY (ABET 1986, AEI)
[edit] See also
- American Society of Heating, Refrigerating and Air-Conditioning Engineers
- Architectural engineering
- Building enclosure commissioning
- BSRIA (Building Services Research and Information Association)
- Chartered Institution of Building Services Engineers
- Construction management
- Electrical drawing
- Environmental engineering
- Fire protection engineering
- Geotechnical engineering
- Hydraulic engineering
- Mechanical systems drawing
- Plumbing drawing
- Project management
- Quantity surveying
- Structural engineering
- Sustainable design
- Transportation engineering
[edit] References
[edit] External links
- ASHRAE American Society of Heating, Refrigerating and Air-Conditioning Engineers
- BSRIA The Building Services Research and Information Association
- CIBSE Chartered Institute of Building Services Engineers
- Modern Building Services journal
- Online Building Services Engineering Lecture Notes
- India
- School of Planning and Architecture,JNA&FAU, Hyderabad,India
|
|