AK-47
|
(1) Frames, receivers, receiver castings, forgings or stampings (2) Barrels (3) Barrel extensions (4) Mounting blocks (trunions) (5) Muzzle attachments (6) Bolts (7) Bolt carriers (8) Operating rods |
| (9) Gas pistons |
|
(10) Trigger housings (11) Triggers (12) Hammers (13) Sears (14) Disconnectors (15) Buttstocks (16) Pistol grips (17) Forearms, handguards (18) Magazine bodies (19) Followers (20) Floorplates |
|
Caliber 7.62x39 mm Action: Gas operated, rotating bolt with 2 lugs Overall length: 870 mm Barrel length: 415 mm Weight: 4,300 g with empty magazine, 4,876 g loaded Magazine capacity 30 rds (40 rds box magazines and 75 rds drums) Sighting range, m: 800 Effective range, m: 300 meters Cyclic rate of fire 600 rds/min Practical rate of fire, single shots 90-100 rds/min; bursts 400 rds/min Muzzle velocity: 780 m/s * Choosing a AK47 Parts Kit * Taking apart the AK47 Parts Kit * Folding the AK47 receiver from a flat * Setting rails in place, support pin, drilling holes * Removing the barrel * Installing trunions into the AK47 receiver * Installing the trigger guard & magazine latch * Installing the barrel * Installing the Trigger Group * Troubleshooting and Test firing * Finishing the AK47 - Bolt Hold Open * Final assembly What spare parts would you suggest stocking for an AK? Pistol grips, lots of magazines and ammo (of course).   General AK-47 * Choosing a AK47 Parts Kit * Taking apart the AK47 Parts Kit * Folding the AK47 receiver from a flat * Setting rails in place, support pin, drilling holes * Removing the barrel * Installing trunions into the AK47 receiver * Installing the trigger guard & magazine latch * Installing the barrel * Installing the Trigger Group * Troubleshooting and Test firing * Finishing the AK47 - Bolt Hold Open * Final assembly What spare parts would you suggest stocking for an AK? Pistol grips, lots of magazines and ammo (of course). Installing the trunions is probably the most difficult step in the process (aside from bending the receiver) mostly because a specialty tool is required to press the rivets. Using a rivet tool is the preferred method of the professionals. Using hard steel rivets and installing them correctly is the the line that divides a professional AK47 build from a junk build and display items. AK-47 folding stocks, AK-47 parts, AK-47 triggers http://www.ak47videos.com/AK47_Gunsmith.php http://www.firearmsid.com/Bullets/bullet1.htm http://www.ak47rifle.com/category/341-AK47_Parts.aspx http://www.ak-47.us/ |